Matatar Karfe Mai Lanƙwasa

Matatun Karfe Masu Lanƙwasa da Bakin Karfe, Tagulla da Titanium don Tace Gas da Ruwa

Ana yin matatun ƙarfe masu ramuka ta amfani da foda na ƙarfe mai siminti don ƙirƙirar matatun ƙarfe masu zurfi

tsarin porous mai uniform don daidaitotace iskar gas da ruwa.

Ana samun matatun ƙarfe masu lanƙwasa na HENGKO a cikin bakin ƙarfe 316L, tagulla, titanium,

da kayan nickel masu girman ramuka daga0.1 μm zuwa 100 μm.

Ana amfani da waɗannan matatun sosai a fannin semiconductor, magunguna, makamashin hydrogen,

da kuma masana'antun sarrafa sinadarai.Siffofi na musamman ciki har dabututu, faifan diski, mazugi,

da harsashisuna samuwa donAikace-aikacen tacewa na OEM.

Masana'antar Tace Karfe Mai Lanƙwasa

– Matatun Tagulla 316L / Tagulla / Titanium

Matatun ƙarfe masu girman gaske waɗanda aka ƙera su don tace iskar gas da ruwa daidai.
Ana samun ƙimar micron na musamman, girma, tsari, da lakabin OEM na sirri.

HENGKO ƙwararre ne a fanninmatatun ƙarfe masu ramuka masu sintered, abubuwan tace bakin ƙarfe masu ramuka,

kumakayan haɗin sintered na musammandon aikace-aikacen masana'antu masu wahala.

Tare da shekaru 20+ na ƙwarewar masana'antu, muna isar da matattara masu ƙarfin injina mai ƙarfi,

tsarin ramuka mai karko, kyakkyawan juriya ga tsatsa, da kuma tsawon rai na aiki.

- Kayan aiki:Bakin Karfe 316L / Tagulla / Titanium / Nickel

- Girman rami:0.1 μm – 100 μm

- Ingantaccen Tacewa:Har zuwa 99.9%

- Juriyar Zafin Jiki:Har zuwa 600°C

- Aikace-aikace:Tace Mai da Iskar Gas

Ko daikuna buƙata0.1–100 µmƙimar micron,316L / Ti / Ni gamikayan aiki, ko kuma na musammanbututu, faifan diski, mazugi,

da harsashi, HENGKO yana bayar da cikakkenOEM/ODMtallafin injiniya da kuma kula da ingancin matakin ISO.

Tuntube mu don aikin tace ƙarfe mai ramuka:ka@hengko.com

Za mu mayar da shi da wuri-wuri cikin awanni 24.

Nemi Matatar Karfe Mai Lanƙwasa Na Musamman

<< < Na Baya 1 2 3 4 5 6 Na gaba >>> Shafi na 4/6

1. Gabatarwa ga Matatun Karfe Masu Lanƙwasa

(Menene Su & Me Yasa Suke da Muhimmanci)

Matatun ƙarfe masu ramuka - wanda kuma aka sani da matatun ƙarfe masu ramuka, matatun ƙarfe masu ramuka,
ko kuma abubuwan da ke da ramuka masu siminti—waɗanda aka ƙera su ne ƙarfe waɗanda ke ɗauke da tsari iri ɗaya
Hanyar sadarwa mai girma uku ta ramukan da suka haɗu.

Ana ƙirƙirar waɗannan ramuka ta hanyar yin amfani da foda na ƙarfe a cikin injin tsabtacewa a yanayin zafi mai kyau, wanda ke samar da tauri,
tsari mai ƙarfi, mai iya ratsawa wanda ke da ikon tacewa da sarrafa kwararar ruwa daidai.
Saboda ƙarfin injina, juriyar tsatsa, kwanciyar hankali, da kuma sake amfani da su,
Ana amfani da matatun ƙarfe masu ramuka sosai a cikin:
-Kayan aikin Semiconductor(CVD / PVD / Etch / Yaɗuwa / ALD)

- Masu nazarin iskar gasda kayan aikin gano iskar gas

- Injin KF / VCR / ISOtsarin flange

- Man fetur& tsarkakewar hydrogen

- Na'urori masu auna muhalli

- Tsarin sinadarai da man fetur

- Masana'antar harhada magunguna da sarrafa sinadarai

- Iskar gas mai zafi/ruwatacewa

- Yin amfani da na'urar,iska, da kumadutse mai yaɗuwa na bakin ƙarfetsarin

- Daidaita kwararar ruwa da kumakama harshen wuta

Matatar ƙarfe mai ramuka tana ba da aikin tacewa daidai kuma daidai,
ko da a cikin mawuyacin yanayi da suka shafi yanayin zafi mai yawa, matsin lamba mai yawa, da sinadarai masu lalata,
iskar gas mai ƙarfi, ko kuma iskar gas mai ƙarfi.

2. Me yasa za ku zaɓi HENGKO a matsayin Masana'antar Tace Karfe Mai Rarrafe?

HENGKO ƙwararren masani ne wanda ya ƙware a matatun ƙarfe masu laushi,
abubuwan tacewa na bakin ƙarfe mai ramuka, bututu/faifan sintered, da OEM na musamman
abubuwan da ke da ramuka masu lanƙwasa waɗanda samfuran firikwensin duniya da masana'antu ke amfani da sudutse mai yaɗuwa na masana'antumasu gina tsarin.

Tare da fiye da shekaru 15+ na ƙwarewar R&D da OEM na ƙarfe mai ramuka, muna samar da:

✔ Cikakken sabis na OEM / ODM
- Girman micron na musamman (0.1–120 µm)
- Tushen da aka saba amfani da shi (10-55%)
-Siffofi na musamman: faifan / kofi / mazugi / bututu / harsashi / tubalan
- Kayan da aka keɓance: 316L / Tagulla / Titanium / Nickel gami
- Injin CNC mai daidaito (NPT / BSP / UNF / VCR / KF / Flange)
- Walda da hatimin ƙarfe da Laser
- Zane-zanen tambari da lakabin sirri
- Tsarin samfuri + samar da taro

✔ Fasaha mai zurfi ta tsaftace injin tsotsar ruwa
- Yana tabbatar da kwanciyar hankaligirman raminrarrabawa, ƙarfin injina mai girma,
da kuma aikin kwarara mai daidaito.

✔ Taimakon fasaha mai ƙarfi
- Injiniyoyi masu ƙwarewa a fannin iskar gas, injinan tacewa, kayan ƙarfe,
da kuma ƙirar firikwensin.

✔ Cikakken tsarin QC
Binciken girman barbashi, gwajin porosity, gano zubar helium, gwajin juriya ga matsin lamba,
da kuma kimanta daidaiton sinadarai.

✔ Babban adadin maimaita oda daga masana'antun masana'antu
- Muna samar da matatun ƙarfe masu ramuka ga kamfanoni a cikin:
semiconductor, kayan aiki, sa ido kan muhalli, injiniyan sinadarai,
kayan aikin iskar gas, masana'antar petrochemical, da kuma masana'antar dakin gwaje-gwaje.

HENGKO ba kamfanin ciniki bane
—mu masana'antar OEM ce kai tsaye, muna tabbatar da ingancin inganci mai kyau
samarwa da farashi mai kyau.

3. Yadda Matatun Karfe Masu Lanƙwasa Ke Aiki

(Bayani game da Matakin Injiniya)

Matatun ƙarfe masu ramuka suna aiki ta hanyar hadaddun abubuwa amma suna da matuƙar tasiri
haɗin tsarin sarrafawa:

3.1 Tace Inji (Babban Tsarin)
Ana katse barbashi da suka fi girman rami ta hanyar injiniya kuma
an riƙe shi a kan ko a cikin tsarin ramuka na 3-D.

3.2 Tace Zurfin
Ba kamar allon raga ba, matatun ƙarfe masu ramuka suna da hanyoyi masu kauri masu ramuka,
barin ƙwayoyin cuta su makale a cikin zurfin kayan.

3.3 Yaɗuwa & Katsewar Inertial
A ƙananan matakan micron (0.1–5 µm), kama ƙwayoyin cuta ya dogara ne akan
Motsin Brownian da karo na inertial.

3.4 Daidaita kwararar Laminar
Karafa masu ramuka suna samar da kwararar laminar iri ɗaya, wanda ya dace da:
- Masu nazarin iskar gas
- Daidaita matsin lamba
- Gano hayaki mai gurbata muhalli
- Na'urorin sarrafa kwarara

3.5 Fashewa da Iska
Idan aka yi amfani da shi don fitar da iskar gas/yaɗuwa, iskar gas mai matsin lamba tana ratsa ƙananan ramuka,
ƙirƙirar ƙananan kumfa masu kyau da daidaito.

4. Zaɓuɓɓukan Kayan Aiki don Matatun Karfe Masu Lanƙwasa

(Cikakken Kwatanta Fasaha)

HENGKO yana ba da kayan ƙarfe da yawa dangane da aikace-aikacen, yanayin sinadarai,

farashi, da buƙatun aiki.

Ga cikakken teburin kwatantawa don taimaka muku yin bita da kwatanta kayan matatun ƙarfe daban-daban masu ramuka cikin sauƙi:

Kayan Aiki	Muhimman Fa'idodi	Mafi kyawun Aikace-aikace
Bakin Karfe 316L (Mafi Shahara)	• Ƙarfin injina mai ƙarfi	• Tsarin gano iskar gas
	• Kyakkyawan juriya ga tsatsa	• Ma'ajiyar KF / VCR ta injin tsotsa
	• Yana jure zafi 200–500°C	• Tacewar sinadarai
	• Ya dace da yawancin iskar gas da ruwaye	• Kariyar firikwensin
	• Mai araha kuma mai karko	• Tsarin iska mai matsewa ta hydrogen / nitrogen /
	• Ya dace da tacewa na masana'antu gabaɗaya
Matatun Karfe Masu Lanƙwasa Na Tagulla	• Ƙarancin farashi	• Tsarin iskar oxygen
	• Matsakaicin ƙarfin injina	• Masu rage sauti
	• Daidaito mai kyau na tacewa	• Tace fitar da hayakin iska
	• Ya dace da tace iska gabaɗaya
Matatun Titanium Porous (Babban Aiki Mai Kyau)	• Juriyar tsatsa mai tsanani	• Tace iskar gas ta Semiconductor
	• Daidawa da Halitta	• Masana'antar likitancin halittu
	• Juriyar zafin jiki har zuwa 600°C	• Tsarin sinadarai masu tsarki
	• Tsaftace sosai, ya dace da muhimman ayyuka
Alloy na Nickel / Monel / Matatun Inconel masu ramuka	• Juriyar tsatsa ta musamman	• Tsarin sinadarai masu tsauri
	• Yana jure iskar gas mai yawan oxidative ko acidic	• Masu samar da wutar lantarki masu zafi sosai
	• Ƙarfin injina mai ƙarfi a ƙarƙashin nauyin zagaye	• Tace iskar gas mai lalata

5. Fasahar Masana'antu:

Yadda HENGKO Ke Samar da Matatun Karfe Masu Lanƙwasa Masu Aiki Mai Kyau

Kayan aikinmu ya haɗa da fasahar ƙarfe mai ƙarfi, sarrafa sintering, injinan daidaitacce, da kuma kula da inganci mai girma.

Matatar Mai Lanƙwasa Bakin Karfe Mai Sintirin Lantarki - Tsarin Kera

6. Bayani dalla-dalla na Fasaha na Matatun Karfe Masu Lanƙwasa

Matatun ƙarfe masu ramuka dole ne su cika ƙa'idodin injiniya masu tsauri don tabbatar da ingantaccen aiki a cikin matsanancin matsin lamba, zafin jiki mai yawa,

ko muhallin da ke lalata muhalli. A ƙasa akwai cikakken jerin ƙayyadaddun fasaha da suka shafi abubuwan da ke cikin ramukan HENGKO.

don haka za ku iya sanin cikakkun bayanai game da kowane kayan ƙarfe mai ramuka da za ku iya amfani da su.

6.1 Bayanan Fasaha na Gabaɗaya

Ƙayyadewa	Darajar / Nisa	Bayanan kula
Ƙimar Micron	0.1–100 µm	Tsarin PSD mai ƙunci, tsarin ramuka mai karko
Porosity	10–55%	Ana iya daidaitawa bisa ga buƙatun kwarara/matsi
Kauri	0.2–10 mm	Ana samun na musamman
Matsakaicin Juriya ga Matsi	Har zuwa 30 MPa	Ya danganta da siffar da kauri
Yanayin Zafin Jiki	-200°C zuwa 600°C	Kowane abu (316L, Ti, Ni alloy)
Yawan Guduwar Ruwa	An gwada shi ta musamman bisa lanƙwasa API/ISO	Ana samun bayanai na kwararar bayanai
Juriyar Sinadarai	Madalla sosai	Ya dace da iskar gas/ruwa mai lalata abubuwa
Hanyar Tsaftacewa	Wankewa ta hanyar amfani da ultrasonic, bayan-rufe, da kuma wanke sinadarai	Ana iya sake amfani da shi
Kayan Aiki	316L / Tagulla / Titanium / Alloy na Nickel	Zaɓin kayan OEM
Zaɓuɓɓukan Siffa	Tube, faifan diski, kofi, mazugi, harsashi, toshe	Cikakken tsari na musamman
Walda	Walda ta Laser / Walda ta TIG	hana zubewa
Inji	Daidaiton CNC har zuwa ±0.02 mm	Don zare da flanges

6.2 Ƙarfin Injin Bayani

Kadara	Darajar da Aka Saba
Ƙarfin Matsi	>150–300 MPa (316L)
Ƙarfin Taurin Kai	500–600 MPa (ya bambanta dangane da kayan aiki)
Matsi na Fashewa	5–30 MPa (ya danganta da OD/ID/kauri)
Rabon Poisson	0.25–0.30
Modulus na Matasa	120–160 GPa

6.3 Bayanan Ayyukan Tacewa

Sigogi	Bayani
Rarraba Girman Rami (PSD)	Rarrabawar da ba ta da ƙarfi tana tabbatar da tacewa mai yiwuwa
Tacewa Mai Zurfi	Kama barbashi na ciki mai matakai da yawa
Daidaito tsakanin kwarara	Guduwar laminar mai ƙarfi sosai
Ƙarfin Iskar Gas	Babban ikon shiga koda a cikin maki 1-2 µm
Ingancin Tacewa na Ruwa	95–99.9% ya danganta da girman micron

6.4 Jadawalin Dacewa da Sinadarai (Gajeren Siga)

Matsakaici	316L	Titanium	Alloy na Nickel	Tagulla
Acids	Mai kyau	Madalla sosai	Madalla sosai	Talaka
Alkali	Mai kyau	Madalla sosai	Madalla sosai	Matsakaici
Sinadaran Halitta	Madalla sosai	Madalla sosai	Madalla sosai	Mai kyau
Ruwa Mai Tsarkakakke	Mai kyau	Madalla sosai	Mai kyau	Talaka
Iskar Iska Mai Haɗaka	Matsakaici	Madalla sosai	Madalla sosai	Talaka
Iskar Gas Mai Lalacewa	Matsakaici	Madalla sosai	Madalla sosai	Talaka

7. Jagorar Zaɓin Samfura

(Makironi • Kayan aiki • Siffa • Aikace-aikace)

A nan za mu lissafa wasu shawarwari dangane da girman ramukanku daban-daban, yanayinsu, siffarsu da kuma

Aplikasi, zaka iya duba cikakkun bayanai kamar haka:

7.1 Yadda Ake Zaɓar Ƙimar Micron

Girman Ma'aunin Micron	Amfani da aka ba da shawarar
0.1–0.5 µm	Tacewar iskar gas mai matuƙar kyau (semiconductor, masu nazarin dakin gwaje-gwaje)
1–5 µm	Masu nazarin iskar gas, masu hana harshen wuta, masu daidaita matsin lamba
10–20 µm	Kariyar firikwensin, tsarin ɗaukar samfurin iskar gas
20–40 µm	Tsaftace iskar gas da ruwa gaba ɗaya
60–100 µm	Rage iska, iska, yaɗuwa

7.2 Yadda Ake Zaɓar Kayan Aiki

Bukatar	Abubuwan da aka ba da shawarar
Babban juriyar tsatsa	Titanium / Nickel Alloy
Babban zafin jiki (400–600°C)	Titanium / Nickel Alloy
Ayyukan da suka shafi farashi	316L / Tagulla
Babban aikace-aikace na tsarki	Titanium
Matsi mai ƙarfi & nauyin inji	316L / Alloy na Nickel
Iskar gas ta Semiconductor	Titanium

7.3 Yadda Ake Zaɓar Siffa

Siffa	Amfani da Shari'a
Faifan diski	Samfuran iskar gas, tacewa a layi
Bututu / Silinda	Rage matsin lamba, yaɗuwa, daidaita matsin lamba
Kofi / Mazugi	Kariyar firikwensin, masu riƙe harshen wuta
harsashi	Tsarin masana'antu masu yawan kwarara
Toshe / Faranti	Masu tace sinadarai, tacewa mai zafi sosai

7.4 Yadda Ake Zaɓa Dangane da Masana'antu

Masana'antu	Nau'in Matatar da aka Ba da Shawara
Semiconductor	Bututu/faifan titanium mai lanƙwasa, 0.1–5 µm
Masu nazarin iskar gas	Bututu/faifan lita 316, 1–20 µm
Tsarin injin tsotsa	Matatun KF/VCR 316L
Masana'antun sinadarai	Harsasai na Ni-alloy
Sa ido kan muhalli	Gidajen firikwensin 316L
Tsarin sparging	Bututun mai ramuka 20–100 µm

8. Yawan Gudawa & Lanƙwasa Matsi

Ga halayen kwararar gabaɗaya dangane da tsarin matattarar ƙarfe mai porous na HENGKO (ainihin lanƙwasa ya dogara da matakin OD/ID/kauri/micron):

8.1 Lanƙwasa Gudun Iskar Gas (Misali: 316L, 10 µm)

Guduwar ruwa tana ƙaruwa a layi a ƙananan bambance-bambancen matsin lamba
Yana shiga tsarin laminar a 0.05–0.2 MPa
Tudun da ke kwance yana tabbatar da babu bugun jini
Ya dace da gano iskar gas, tsarin ɗaukar samfur

8.2 Lanƙwasa na Ruwa (Misali: 316L, 20 µm)

Ana buƙatar ƙarin matsin lamba saboda ɗanko
Babban kwanciyar hankali a ƙarƙashin canjin zafin jiki
Yana da kyau ga alcohols, hydrocarbons, da kuma solvents

Gudawa vs Rage Matsi ta hanyar Gas da Lanƙwasa Gudun Ruwa

9. Samfuran Samfura

(Fasfo • Bututu • Mazugi • Akwatin Na'urar Firikwensin)

Matatun Faifan Karfe Mai Lanƙwasa 9.1

Ana amfani da shi a cikin na'urorin nazarin iskar gas, tsarin injinan iska, samfura, da kariyar firikwensin.

Sigogi	Nisa
OD	5–120 mm
Kauri	0.3–5 mm
Ƙimar Micron	0.1–100 µm
Kayan Aiki	316L / Ti / Tagulla / Ni gami

9.2 Bututun Karfe Mai Lanƙwasa (Matatun Silinda)

Ya dace da sparging, aeration, equalization kwarara, da kuma tacewa mai ƙarfi.

Sigogi	Nisa
OD	3–80 mm
Tsawon	10–1200 mm
Kauri a Bango	0.5–3 mm
Ƙimar Micron	0.2–60 µm

9.3 Matatun Karfe Mai Lanƙwasa/Kofi

Ana amfani da shi a cikin masu riƙe harshen wuta, gidajen firikwensin, da na'urorin gano iskar gas.

Sigogi	Nisa
OD	3–50 mm
Tsawo	5–60 mm
Micron	1–50 µm

9.4 Kwantenan Karfe Masu Lanƙwasa

Ana amfani da shi a masana'antun sinadarai, injinan tace iskar gas, injin tace iskar gas mai matsewa.

Sigogi	Nisa
OD	20–80 mm
Tsawon	50–1000 mm
Manyan Maɓallan Ƙarshe	NPT / BSP / Flange / Na Musamman
Micron	1–40 µm

Matatun Gidaje Masu Lanƙwasa Na Karfe 9.5

Ana amfani da shi a yanayin zafi, danshi, wurin raɓa, da na'urorin auna iskar gas.

Sigogi	Nisa
Zaren Zare	M10 / M12 / 1/4 NPT / Na musamman
Micron	1–20 µm
Kayan Aiki	316L / Alloy na Nickel
Nau'in Gidaje	Kofi / Tube / Musamman

10. Masana'antun Aikace-aikace

Ana amfani da matatun ƙarfe masu ramuka a ko'inaBangarorin masana'antu sama da 50.

10.1 Masana'antar Semiconductor

CVD
PVD
Gyaran fuska
ALD
Tanderun Yaɗawa
Layukan iskar gas masu tsarki

Ana fifita matatun ƙarfe masu lanƙwasa na titanium saboda tsarki da juriya ga tsatsa.

10.2 Binciken Iskar Gas da Ganowa

An yi amfani da shi a cikin:

na'urar nazarin CO₂
Na'urori masu auna sigina na O₂ / H₂ / CH₄
Kayan kida na FTIR
Na'urorin gano iskar gas masu ɗaukuwa

Yana samar da kwararar iska mai ƙarfi kuma yana hana gurɓatar ƙwayoyin cuta.

10.3 Masana'antun Sarrafa Sinadarai

An yi amfani da shi don:

Masu samar da wutar lantarki masu yawan zafin jiki
Tacewar sinadaran
Kariyar Mai Haɗawa
Tace iskar gas mai lalata

An yi amfani da sinadarin nickel sosai a nan.

Tsarin injin tsotsawa da na'urar VCR/KF 10.4

Matatun kariya masu ramuka na KF16 / KF25 / KF40
Matatun gasket na VCR
Dakunan injin tsotsa

An fi son ƙarfe mai nauyin lita 316 na bakin ƙarfe.

10.5 Kula da Muhalli

Na'urori masu auna ingancin iska
Tashoshin yanayi
Tsarin gwajin ruwa

Karfe mai ramuka yana hana ƙura, kwari, da ɗigon ruwa shiga na'urori masu auna sigina.

10.6 Tsarin Sanyaya da Sanyaya Iska

Don haɗa iskar gas zuwa ruwa (masu amsawar sinadarai, masu samar da sinadarai, dakunan gwaje-gwaje).

Yaɗuwar kumfa mai kyau
Rarrabawa iri ɗaya ce sosai
Babu toshewa

Bututun ƙarfe masu ramuka (20-100 µm) suna aiki mafi kyau.

11. Dalilin da yasa Abokan Ciniki ke Canjawa zuwa HENGKO

Ana amfani da matatun ƙarfe masu ramuka a cikin nazarin semiconductor, petrochemical, muhalli, da iskar gas,

da tsarin sarrafa kansa na masana'antu.

Kamfanoni da yawa na duniya suna amfani da abubuwan ƙarfe masu ramuka na mallaka, amma HENGKO yana ba da

cikakken jituwa da maye gurbin ma'aunitare da aiki daidai ko mafi kyau.

Fasali	MOTT / Ames / Wasu	HENGKO
Keɓancewa na OEM	Iyakance	Unlimited (cikakken OEM/ODM)
Lokacin Isarwa	A hankali	Mai sauri, mai sassauƙa
Matsakaicin kudin shiga (MOQ)	Matsakaici-Mafi Girma	Ƙarancin MOQ yana samuwa
farashi	Mafi girma	Mafi inganci
Tallafin Injiniya	Mai ƙarfi	Ƙarfi + Da sauri + Mai sassauci
Na'urar auna firikwensin gidaje OEM	Ba kasafai ake samu ba	Na musamman

Sabis na Musamman na OEM / ODM na 11.1

OEM/ODM shine ginshiƙin kasuwancin ƙarfe mai ramuka na HENGKO.
Muna goyon bayacikakken keɓancewa, ciki har da:

Sigogi na Keɓancewa

Sigar Musamman	Bayani
Ƙimar Micron	0.1–100 µm (daidaitaccen ikon sarrafa PSD)
Kayan Aiki	316L / Tagulla / Titanium / Monel / Inconel
Girma	OD/ID/Tsawon/Kauri gaba ɗaya za a iya daidaita shi
Siffofi	Faifan diski, bututu, mazugi, kofi, harsashi, toshe
Tsarin Zaren Zare	NPT, BSP, UNF, M10/M12, ko kuma na musamman
Ƙarshen Fuskar	Electropolish, passivation, polishing
Walda	Walda ta Laser, walda ta TIG
Tsarin rami	Porosity mai sarrafawa (10–55%)
Aikin Gudawa	An tsara shi bisa ga manufofin rage matsin lamba
Tambari / Lakabi	Bugawa ta OEM, alamar Laser
Marufi	Masana'antar PE, mai hana ƙura, zaɓuɓɓukan ɗaki masu tsafta

11.2 Tsarin Tsarin OEM

1. Tarin Bukatu
Matsayin Micron / kayan aiki / zane / muhalli / manufa kwarara

2. Zane & Kwaikwayo
Yawan kwarara, rarrabawar porosity, nazarin nauyin injina

3. Ƙirƙirar Samfura
Ƙananan samfura (guda 1-20)

4. Gwaji & Tabbatarwa
Gwaje-gwajen daidaiton matsi, sinadarai, da girma

5. Samar da Taro Mai Yawa
Injin tacewa na injin tsotsa + CNC + walda + QC

6. Marufi & Jigilar kaya
Marufi na fitarwa na masana'antu

Tambayoyin da ake yawan yi - Tambayoyin Injiniya na gama gari

1. Menene daidaitaccen ma'aunin ma'aunin micron na matatun ƙarfe masu ramuka?

Ana samun matatun ƙarfe masu porous na HENGKO daga0.1 µm zuwa 100 µm, tare da kunkuntar PSD don ingantaccen aikin tacewa mai maimaitawa.

2. Za a iya tsaftace matatun ƙarfe masu ramuka a kuma sake amfani da su?

Eh. Ana iya tsaftace su ta hanyar:

*Baya-baya
* Tsaftace Ultrasonic
*Tsabtace sinadarai (acid/alkali ya danganta da kayan da aka yi amfani da su)
* Yin burodi mai zafi sosai

Wannan yana sa su zama masu inganci sosai idan aka kwatanta da matatun da za a iya zubarwa.

3. Menene matsakaicin juriyar zafin jiki?

Kayan Aiki	Matsakaicin Zafin Jiki
316L	400–500°C
Titanium	Har zuwa 600°C
Alloy na Nickel	Har zuwa 600°C
Tagulla	~250°C

4. Wane matsin lamba matatun ƙarfe masu ramuka za su iya jure wa?

Dangane da OD/ID da kauri, za su iya jurewa har zuwa:

*10–30 MPa(Bututun lita 316)
*5–20 MPa(faifai da mazugi)

Samfura na musamman masu matsin lamba suna samuwa akan buƙata.

5. Shin matatun ƙarfe masu ramuka sun dace da iskar gas ko ruwa mai lalata?

Eh.
316L ya dace da sinadarai na masana'antu gabaɗaya.
Ana ba da shawarar yin amfani da ƙarfe na titanium da nickel don:

* Iskar gas mai guba
* Iskar gas mai guba
* Ruwa mai lalata
* Sinadaran da ke da tsafta sosai

6. Za ku iya ƙera bisa ga zane ko samfura?

Hakika.
Mun yarda:

*Fayil ɗin CAD na 2D/3D
*MATAKAI/IGES
* Samfuran jiki
* Bukatun injiniyan baya

7. Menene lokacin jagoranci na yau da kullun?

* Samfura:Kwanaki 7–12

* Samar da kayayyaki masu yawa:Kwanaki 15–25

* Manyan umarni na OEM: an yi shawarwari bisa ga girma

8. Shin kuna samar da alamar OEM da lakabi?

Eh, muna goyon bayan:

* Tambayoyi masu siffar laser

*Marufi mai zaman kansa na lakabi

* Buga lambar barcode ta OEM

9. Waɗanne masana'antu ne ke amfani da matatun ƙarfe masu ramuka?

* Mai haɗa semiconductor
*Binciken iskar gas
*Tsire-tsire masu sinadarai
*Sa ido kan muhalli
* Tsarin mai da hydrogen
*Tsarin injinan iska
*Dakin gwaje-gwaje da fasahar kere-kere

10. Ta yaya zan iya samun ƙimar fasaha?

Za ka iya aika bayanan aikinka ta imel kai tsaye zuwa:ka@hengko.com

Shin Ka Shirya Don Fara Aikin Tace Karfe Mai Rarrafe?

Muna ba da cikakken tallafin injiniyan OEM/ODM, tun daga ƙirar ƙimar micron har zuwa kammala haɗakar ƙarfe mai sintered.
Ko kuna buƙatar matatun mai mai girman 316L, Titanium, ko nickel alloy, ƙungiyarmu ta fasaha za ta iya taimaka muku wajen gina mafita mai dacewa.

Bukatunku ta imel zuwa gare mu: ka@hengko.com

- Tallafin WhatsApp/WeChat yana samuwa idan an buƙata

- Zane • Bayani • Samfura • Zane-zane na Musamman

HENGKO - Masana'antar OEM ɗin matatar ƙarfe mai ramuka da aminci

Aika mana da sakonka:

Rubuta saƙonka a nan ka aika mana da shi