Matatun Karfe Masu Lanƙwasa da Bakin Karfe, Tagulla da Titanium don Tace Gas da Ruwa
Ana yin matatun ƙarfe masu ramuka ta amfani da foda na ƙarfe mai siminti don ƙirƙirar matatun ƙarfe masu zurfi
tsarin porous mai uniform don daidaitotace iskar gas da ruwa.
Ana samun matatun ƙarfe masu lanƙwasa na HENGKO a cikin bakin ƙarfe 316L, tagulla, titanium,
da kayan nickel masu girman ramuka daga0.1 μm zuwa 100 μm.
Ana amfani da waɗannan matatun sosai a fannin semiconductor, magunguna, makamashin hydrogen,
da kuma masana'antun sarrafa sinadarai.Siffofi na musamman ciki har dabututu, faifan diski, mazugi,
da harsashisuna samuwa donAikace-aikacen tacewa na OEM.
Masana'antar Tace Karfe Mai Lanƙwasa
– Matatun Tagulla 316L / Tagulla / Titanium
Matatun ƙarfe masu girman gaske waɗanda aka ƙera su don tace iskar gas da ruwa daidai.
Ana samun ƙimar micron na musamman, girma, tsari, da lakabin OEM na sirri.
HENGKO ƙwararre ne a fanninmatatun ƙarfe masu ramuka masu sintered, abubuwan tace bakin ƙarfe masu ramuka,
kumakayan haɗin sintered na musammandon aikace-aikacen masana'antu masu wahala.
Tare da shekaru 20+ na ƙwarewar masana'antu, muna isar da matattara masu ƙarfin injina mai ƙarfi,
tsarin ramuka mai karko, kyakkyawan juriya ga tsatsa, da kuma tsawon rai na aiki.
- Kayan aiki:Bakin Karfe 316L / Tagulla / Titanium / Nickel
- Girman rami:0.1 μm – 100 μm
- Ingantaccen Tacewa:Har zuwa 99.9%
- Juriyar Zafin Jiki:Har zuwa 600°C
- Aikace-aikace:Tace Mai da Iskar Gas
Ko daikuna buƙata0.1–100 µmƙimar micron,316L / Ti / Ni gamikayan aiki, ko kuma na musammanbututu, faifan diski, mazugi,
da harsashi, HENGKO yana bayar da cikakkenOEM/ODMtallafin injiniya da kuma kula da ingancin matakin ISO.
Tuntube mu don aikin tace ƙarfe mai ramuka:ka@hengko.com
Za mu mayar da shi da wuri-wuri cikin awanni 24.
Nemi Matatar Karfe Mai Lanƙwasa Na Musamman
-
Matatar tagulla ta tagulla mai ƙarfi da za a iya sake amfani da ita a yanayin zafi mai zafi ...
Bututun matattarar HENGKO mai ramuka na iya zama mara zurfi ko makafi kuma suna da kauri mafi ƙarancin 1 mm a bango. An yi su ta hanyar haɗa foda mai isostatic a cikin wani yanayi mai sassauƙa...
Duba Cikakkun Bayani -
Wicking taro mai lanƙwasa ƙarfe micro capillary tace bututu don tsarin zafi mai zafi pip ...
Tsarin ƙarfe mai ramuka mai ramuka mai tsari iri ɗaya zai fitar/shake ruwa daga ma'ajiyar ruwa ta cikin tsarin ƙarfe mai ramuka sannan ya shafa...
Duba Cikakkun Bayani -
Sabuwar allon iso na zobe mai tsakiya na injin, matatar ƙarfe mai ramuka masu sintered
Zoben tsakiya tare da matattarar ƙarfe ta Sintered sune abubuwan da aka saba amfani da su don duk aikace-aikacen injin tsotsa da injin tsotsa mai ƙarfi. Zoben tsakiya tare da matattarar ƙarfe mai tsatsa...
Duba Cikakkun Bayani -
Sassan matattarar tacewa ta jan ƙarfe mai kauri 3 mai girman micron 70
Matatun Muffler Masu Tsabtace Fuska Masu Fuska Suna amfani da abubuwan tace tagulla masu ramuka waɗanda aka haɗa su da kayan haɗin bututu na yau da kullun. Waɗannan ƙananan muffler masu araha kuma masu rahusa ...
Duba Cikakkun Bayani -
sintered porous karfe foda tagulla shaye-shaye tace masu shiru dacewa da amo tace rage ...
Matatun Muffler na Pneumatic Sintered suna amfani da sinadarin tace tagulla mai ramuka waɗanda aka haɗa su da kayan haɗin bututu na yau da kullun. Waɗannan ƙananan muffler masu araha kuma masu rahusa ...
Duba Cikakkun Bayani
1. Gabatarwa ga Matatun Karfe Masu Lanƙwasa
(Menene Su & Me Yasa Suke da Muhimmanci)
Matatun ƙarfe masu ramuka - wanda kuma aka sani da matatun ƙarfe masu ramuka, matatun ƙarfe masu ramuka,
ko kuma abubuwan da ke da ramuka masu siminti—waɗanda aka ƙera su ne ƙarfe waɗanda ke ɗauke da tsari iri ɗaya
Hanyar sadarwa mai girma uku ta ramukan da suka haɗu.
Ana ƙirƙirar waɗannan ramuka ta hanyar yin amfani da foda na ƙarfe a cikin injin tsabtacewa a yanayin zafi mai kyau, wanda ke samar da tauri,
tsari mai ƙarfi, mai iya ratsawa wanda ke da ikon tacewa da sarrafa kwararar ruwa daidai.
Saboda ƙarfin injina, juriyar tsatsa, kwanciyar hankali, da kuma sake amfani da su,
Ana amfani da matatun ƙarfe masu ramuka sosai a cikin:
-Kayan aikin Semiconductor(CVD / PVD / Etch / Yaɗuwa / ALD)
- Masu nazarin iskar gasda kayan aikin gano iskar gas
- Injin KF / VCR / ISOtsarin flange
- Man fetur& tsarkakewar hydrogen
- Na'urori masu auna muhalli
- Tsarin sinadarai da man fetur
- Masana'antar harhada magunguna da sarrafa sinadarai
- Iskar gas mai zafi/ruwatacewa
- Yin amfani da na'urar,iska, da kumadutse mai yaɗuwa na bakin ƙarfetsarin
- Daidaita kwararar ruwa da kumakama harshen wuta
Matatar ƙarfe mai ramuka tana ba da aikin tacewa daidai kuma daidai,
ko da a cikin mawuyacin yanayi da suka shafi yanayin zafi mai yawa, matsin lamba mai yawa, da sinadarai masu lalata,
iskar gas mai ƙarfi, ko kuma iskar gas mai ƙarfi.
2. Me yasa za ku zaɓi HENGKO a matsayin Masana'antar Tace Karfe Mai Rarrafe?
HENGKO ƙwararren masani ne wanda ya ƙware a matatun ƙarfe masu laushi,
abubuwan tacewa na bakin ƙarfe mai ramuka, bututu/faifan sintered, da OEM na musamman
abubuwan da ke da ramuka masu lanƙwasa waɗanda samfuran firikwensin duniya da masana'antu ke amfani da sudutse mai yaɗuwa na masana'antumasu gina tsarin.
Tare da fiye da shekaru 15+ na ƙwarewar R&D da OEM na ƙarfe mai ramuka, muna samar da:
✔ Cikakken sabis na OEM / ODM
- Girman micron na musamman (0.1–120 µm)
- Tushen da aka saba amfani da shi (10-55%)
-Siffofi na musamman: faifan / kofi / mazugi / bututu / harsashi / tubalan
- Kayan da aka keɓance: 316L / Tagulla / Titanium / Nickel gami
- Injin CNC mai daidaito (NPT / BSP / UNF / VCR / KF / Flange)
- Walda da hatimin ƙarfe da Laser
- Zane-zanen tambari da lakabin sirri
- Tsarin samfuri + samar da taro
✔ Fasaha mai zurfi ta tsaftace injin tsotsar ruwa
- Yana tabbatar da kwanciyar hankaligirman raminrarrabawa, ƙarfin injina mai girma,
da kuma aikin kwarara mai daidaito.
✔ Taimakon fasaha mai ƙarfi
- Injiniyoyi masu ƙwarewa a fannin iskar gas, injinan tacewa, kayan ƙarfe,
da kuma ƙirar firikwensin.
✔ Cikakken tsarin QC
Binciken girman barbashi, gwajin porosity, gano zubar helium, gwajin juriya ga matsin lamba,
da kuma kimanta daidaiton sinadarai.
✔ Babban adadin maimaita oda daga masana'antun masana'antu
- Muna samar da matatun ƙarfe masu ramuka ga kamfanoni a cikin:
semiconductor, kayan aiki, sa ido kan muhalli, injiniyan sinadarai,
kayan aikin iskar gas, masana'antar petrochemical, da kuma masana'antar dakin gwaje-gwaje.
HENGKO ba kamfanin ciniki bane
—mu masana'antar OEM ce kai tsaye, muna tabbatar da ingancin inganci mai kyau
samarwa da farashi mai kyau.
3. Yadda Matatun Karfe Masu Lanƙwasa Ke Aiki
(Bayani game da Matakin Injiniya)
Matatun ƙarfe masu ramuka suna aiki ta hanyar hadaddun abubuwa amma suna da matuƙar tasiri
haɗin tsarin sarrafawa:
3.1 Tace Inji (Babban Tsarin)
Ana katse barbashi da suka fi girman rami ta hanyar injiniya kuma
an riƙe shi a kan ko a cikin tsarin ramuka na 3-D.
3.2 Tace Zurfin
Ba kamar allon raga ba, matatun ƙarfe masu ramuka suna da hanyoyi masu kauri masu ramuka,
barin ƙwayoyin cuta su makale a cikin zurfin kayan.
3.3 Yaɗuwa & Katsewar Inertial
A ƙananan matakan micron (0.1–5 µm), kama ƙwayoyin cuta ya dogara ne akan
Motsin Brownian da karo na inertial.
3.4 Daidaita kwararar Laminar
Karafa masu ramuka suna samar da kwararar laminar iri ɗaya, wanda ya dace da:
- Masu nazarin iskar gas
- Daidaita matsin lamba
- Gano hayaki mai gurbata muhalli
- Na'urorin sarrafa kwarara
3.5 Fashewa da Iska
Idan aka yi amfani da shi don fitar da iskar gas/yaɗuwa, iskar gas mai matsin lamba tana ratsa ƙananan ramuka,
ƙirƙirar ƙananan kumfa masu kyau da daidaito.
4. Zaɓuɓɓukan Kayan Aiki don Matatun Karfe Masu Lanƙwasa
(Cikakken Kwatanta Fasaha)
HENGKO yana ba da kayan ƙarfe da yawa dangane da aikace-aikacen, yanayin sinadarai,
farashi, da buƙatun aiki.
Ga cikakken teburin kwatantawa don taimaka muku yin bita da kwatanta kayan matatun ƙarfe daban-daban masu ramuka cikin sauƙi:
| Kayan Aiki | Muhimman Fa'idodi | Mafi kyawun Aikace-aikace |
| Bakin Karfe 316L (Mafi Shahara) | • Ƙarfin injina mai ƙarfi | • Tsarin gano iskar gas |
| • Kyakkyawan juriya ga tsatsa | • Ma'ajiyar KF / VCR ta injin tsotsa | |
| • Yana jure zafi 200–500°C | • Tacewar sinadarai | |
| • Ya dace da yawancin iskar gas da ruwaye | • Kariyar firikwensin | |
| • Mai araha kuma mai karko | • Tsarin iska mai matsewa ta hydrogen / nitrogen / | |
| • Ya dace da tacewa na masana'antu gabaɗaya | ||
| Matatun Karfe Masu Lanƙwasa Na Tagulla | • Ƙarancin farashi | • Tsarin iskar oxygen |
| • Matsakaicin ƙarfin injina | • Masu rage sauti | |
| • Daidaito mai kyau na tacewa | • Tace fitar da hayakin iska | |
| • Ya dace da tace iska gabaɗaya | ||
| Matatun Titanium Porous (Babban Aiki Mai Kyau) | • Juriyar tsatsa mai tsanani | • Tace iskar gas ta Semiconductor |
| • Daidawa da Halitta | • Masana'antar likitancin halittu | |
| • Juriyar zafin jiki har zuwa 600°C | • Tsarin sinadarai masu tsarki | |
| • Tsaftace sosai, ya dace da muhimman ayyuka | ||
| Alloy na Nickel / Monel / Matatun Inconel masu ramuka | • Juriyar tsatsa ta musamman | • Tsarin sinadarai masu tsauri |
| • Yana jure iskar gas mai yawan oxidative ko acidic | • Masu samar da wutar lantarki masu zafi sosai | |
| • Ƙarfin injina mai ƙarfi a ƙarƙashin nauyin zagaye | • Tace iskar gas mai lalata |
5. Fasahar Masana'antu:
Yadda HENGKO Ke Samar da Matatun Karfe Masu Lanƙwasa Masu Aiki Mai Kyau
Kayan aikinmu ya haɗa da fasahar ƙarfe mai ƙarfi, sarrafa sintering, injinan daidaitacce, da kuma kula da inganci mai girma.
6. Bayani dalla-dalla na Fasaha na Matatun Karfe Masu Lanƙwasa
Matatun ƙarfe masu ramuka dole ne su cika ƙa'idodin injiniya masu tsauri don tabbatar da ingantaccen aiki a cikin matsanancin matsin lamba, zafin jiki mai yawa,
ko muhallin da ke lalata muhalli. A ƙasa akwai cikakken jerin ƙayyadaddun fasaha da suka shafi abubuwan da ke cikin ramukan HENGKO.
don haka za ku iya sanin cikakkun bayanai game da kowane kayan ƙarfe mai ramuka da za ku iya amfani da su.
6.1 Bayanan Fasaha na Gabaɗaya
| Ƙayyadewa | Darajar / Nisa | Bayanan kula |
|---|---|---|
| Ƙimar Micron | 0.1–100 µm | Tsarin PSD mai ƙunci, tsarin ramuka mai karko |
| Porosity | 10–55% | Ana iya daidaitawa bisa ga buƙatun kwarara/matsi |
| Kauri | 0.2–10 mm | Ana samun na musamman |
| Matsakaicin Juriya ga Matsi | Har zuwa 30 MPa | Ya danganta da siffar da kauri |
| Yanayin Zafin Jiki | -200°C zuwa 600°C | Kowane abu (316L, Ti, Ni alloy) |
| Yawan Guduwar Ruwa | An gwada shi ta musamman bisa lanƙwasa API/ISO | Ana samun bayanai na kwararar bayanai |
| Juriyar Sinadarai | Madalla sosai | Ya dace da iskar gas/ruwa mai lalata abubuwa |
| Hanyar Tsaftacewa | Wankewa ta hanyar amfani da ultrasonic, bayan-rufe, da kuma wanke sinadarai | Ana iya sake amfani da shi |
| Kayan Aiki | 316L / Tagulla / Titanium / Alloy na Nickel | Zaɓin kayan OEM |
| Zaɓuɓɓukan Siffa | Tube, faifan diski, kofi, mazugi, harsashi, toshe | Cikakken tsari na musamman |
| Walda | Walda ta Laser / Walda ta TIG | hana zubewa |
| Inji | Daidaiton CNC har zuwa ±0.02 mm | Don zare da flanges |
6.2 Ƙarfin Injin Bayani
| Kadara | Darajar da Aka Saba |
|---|---|
| Ƙarfin Matsi | >150–300 MPa (316L) |
| Ƙarfin Taurin Kai | 500–600 MPa (ya bambanta dangane da kayan aiki) |
| Matsi na Fashewa | 5–30 MPa (ya danganta da OD/ID/kauri) |
| Rabon Poisson | 0.25–0.30 |
| Modulus na Matasa | 120–160 GPa |
6.3 Bayanan Ayyukan Tacewa
| Sigogi | Bayani |
|---|---|
| Rarraba Girman Rami (PSD) | Rarrabawar da ba ta da ƙarfi tana tabbatar da tacewa mai yiwuwa |
| Tacewa Mai Zurfi | Kama barbashi na ciki mai matakai da yawa |
| Daidaito tsakanin kwarara | Guduwar laminar mai ƙarfi sosai |
| Ƙarfin Iskar Gas | Babban ikon shiga koda a cikin maki 1-2 µm |
| Ingancin Tacewa na Ruwa | 95–99.9% ya danganta da girman micron |
6.4 Jadawalin Dacewa da Sinadarai (Gajeren Siga)
| Matsakaici | 316L | Titanium | Alloy na Nickel | Tagulla |
|---|---|---|---|---|
| Acids | Mai kyau | Madalla sosai | Madalla sosai | Talaka |
| Alkali | Mai kyau | Madalla sosai | Madalla sosai | Matsakaici |
| Sinadaran Halitta | Madalla sosai | Madalla sosai | Madalla sosai | Mai kyau |
| Ruwa Mai Tsarkakakke | Mai kyau | Madalla sosai | Mai kyau | Talaka |
| Iskar Iska Mai Haɗaka | Matsakaici | Madalla sosai | Madalla sosai | Talaka |
| Iskar Gas Mai Lalacewa | Matsakaici | Madalla sosai | Madalla sosai | Talaka |
7. Jagorar Zaɓin Samfura
(Makironi • Kayan aiki • Siffa • Aikace-aikace)
A nan za mu lissafa wasu shawarwari dangane da girman ramukanku daban-daban, yanayinsu, siffarsu da kuma
Aplikasi, zaka iya duba cikakkun bayanai kamar haka:
7.1 Yadda Ake Zaɓar Ƙimar Micron
| Girman Ma'aunin Micron | Amfani da aka ba da shawarar |
|---|---|
| 0.1–0.5 µm | Tacewar iskar gas mai matuƙar kyau (semiconductor, masu nazarin dakin gwaje-gwaje) |
| 1–5 µm | Masu nazarin iskar gas, masu hana harshen wuta, masu daidaita matsin lamba |
| 10–20 µm | Kariyar firikwensin, tsarin ɗaukar samfurin iskar gas |
| 20–40 µm | Tsaftace iskar gas da ruwa gaba ɗaya |
| 60–100 µm | Rage iska, iska, yaɗuwa |
7.2 Yadda Ake Zaɓar Kayan Aiki
| Bukatar | Abubuwan da aka ba da shawarar |
|---|---|
| Babban juriyar tsatsa | Titanium / Nickel Alloy |
| Babban zafin jiki (400–600°C) | Titanium / Nickel Alloy |
| Ayyukan da suka shafi farashi | 316L / Tagulla |
| Babban aikace-aikace na tsarki | Titanium |
| Matsi mai ƙarfi & nauyin inji | 316L / Alloy na Nickel |
| Iskar gas ta Semiconductor | Titanium |
7.3 Yadda Ake Zaɓar Siffa
| Siffa | Amfani da Shari'a |
|---|---|
| Faifan diski | Samfuran iskar gas, tacewa a layi |
| Bututu / Silinda | Rage matsin lamba, yaɗuwa, daidaita matsin lamba |
| Kofi / Mazugi | Kariyar firikwensin, masu riƙe harshen wuta |
| harsashi | Tsarin masana'antu masu yawan kwarara |
| Toshe / Faranti | Masu tace sinadarai, tacewa mai zafi sosai |
7.4 Yadda Ake Zaɓa Dangane da Masana'antu
| Masana'antu | Nau'in Matatar da aka Ba da Shawara |
|---|---|
| Semiconductor | Bututu/faifan titanium mai lanƙwasa, 0.1–5 µm |
| Masu nazarin iskar gas | Bututu/faifan lita 316, 1–20 µm |
| Tsarin injin tsotsa | Matatun KF/VCR 316L |
| Masana'antun sinadarai | Harsasai na Ni-alloy |
| Sa ido kan muhalli | Gidajen firikwensin 316L |
| Tsarin sparging | Bututun mai ramuka 20–100 µm |
8. Yawan Gudawa & Lanƙwasa Matsi
Ga halayen kwararar gabaɗaya dangane da tsarin matattarar ƙarfe mai porous na HENGKO (ainihin lanƙwasa ya dogara da matakin OD/ID/kauri/micron):
8.1 Lanƙwasa Gudun Iskar Gas (Misali: 316L, 10 µm)
- Guduwar ruwa tana ƙaruwa a layi a ƙananan bambance-bambancen matsin lamba
- Yana shiga tsarin laminar a 0.05–0.2 MPa
- Tudun da ke kwance yana tabbatar da babu bugun jini
- Ya dace da gano iskar gas, tsarin ɗaukar samfur
8.2 Lanƙwasa na Ruwa (Misali: 316L, 20 µm)
- Ana buƙatar ƙarin matsin lamba saboda ɗanko
- Babban kwanciyar hankali a ƙarƙashin canjin zafin jiki
- Yana da kyau ga alcohols, hydrocarbons, da kuma solvents
9. Samfuran Samfura
(Fasfo • Bututu • Mazugi • Akwatin Na'urar Firikwensin)
Matatun Faifan Karfe Mai Lanƙwasa 9.1
Ana amfani da shi a cikin na'urorin nazarin iskar gas, tsarin injinan iska, samfura, da kariyar firikwensin.
| Sigogi | Nisa |
|---|---|
| OD | 5–120 mm |
| Kauri | 0.3–5 mm |
| Ƙimar Micron | 0.1–100 µm |
| Kayan Aiki | 316L / Ti / Tagulla / Ni gami |
9.2 Bututun Karfe Mai Lanƙwasa (Matatun Silinda)
Ya dace da sparging, aeration, equalization kwarara, da kuma tacewa mai ƙarfi.
| Sigogi | Nisa |
|---|---|
| OD | 3–80 mm |
| Tsawon | 10–1200 mm |
| Kauri a Bango | 0.5–3 mm |
| Ƙimar Micron | 0.2–60 µm |
9.3 Matatun Karfe Mai Lanƙwasa/Kofi
Ana amfani da shi a cikin masu riƙe harshen wuta, gidajen firikwensin, da na'urorin gano iskar gas.
| Sigogi | Nisa |
|---|---|
| OD | 3–50 mm |
| Tsawo | 5–60 mm |
| Micron | 1–50 µm |
9.4 Kwantenan Karfe Masu Lanƙwasa
Ana amfani da shi a masana'antun sinadarai, injinan tace iskar gas, injin tace iskar gas mai matsewa.
| Sigogi | Nisa |
|---|---|
| OD | 20–80 mm |
| Tsawon | 50–1000 mm |
| Manyan Maɓallan Ƙarshe | NPT / BSP / Flange / Na Musamman |
| Micron | 1–40 µm |
Matatun Gidaje Masu Lanƙwasa Na Karfe 9.5
Ana amfani da shi a yanayin zafi, danshi, wurin raɓa, da na'urorin auna iskar gas.
| Sigogi | Nisa |
|---|---|
| Zaren Zare | M10 / M12 / 1/4 NPT / Na musamman |
| Micron | 1–20 µm |
| Kayan Aiki | 316L / Alloy na Nickel |
| Nau'in Gidaje | Kofi / Tube / Musamman |
10. Masana'antun Aikace-aikace
Ana amfani da matatun ƙarfe masu ramuka a ko'inaBangarorin masana'antu sama da 50.
10.1 Masana'antar Semiconductor
- CVD
- PVD
- Gyaran fuska
- ALD
- Tanderun Yaɗawa
- Layukan iskar gas masu tsarki
Ana fifita matatun ƙarfe masu lanƙwasa na titanium saboda tsarki da juriya ga tsatsa.
10.2 Binciken Iskar Gas da Ganowa
An yi amfani da shi a cikin:
- na'urar nazarin CO₂
- Na'urori masu auna sigina na O₂ / H₂ / CH₄
- Kayan kida na FTIR
- Na'urorin gano iskar gas masu ɗaukuwa
Yana samar da kwararar iska mai ƙarfi kuma yana hana gurɓatar ƙwayoyin cuta.
10.3 Masana'antun Sarrafa Sinadarai
An yi amfani da shi don:
- Masu samar da wutar lantarki masu yawan zafin jiki
- Tacewar sinadaran
- Kariyar Mai Haɗawa
- Tace iskar gas mai lalata
An yi amfani da sinadarin nickel sosai a nan.
Tsarin injin tsotsawa da na'urar VCR/KF 10.4
- Matatun kariya masu ramuka na KF16 / KF25 / KF40
- Matatun gasket na VCR
- Dakunan injin tsotsa
An fi son ƙarfe mai nauyin lita 316 na bakin ƙarfe.
10.5 Kula da Muhalli
- Na'urori masu auna ingancin iska
- Tashoshin yanayi
- Tsarin gwajin ruwa
Karfe mai ramuka yana hana ƙura, kwari, da ɗigon ruwa shiga na'urori masu auna sigina.
10.6 Tsarin Sanyaya da Sanyaya Iska
Don haɗa iskar gas zuwa ruwa (masu amsawar sinadarai, masu samar da sinadarai, dakunan gwaje-gwaje).
- Yaɗuwar kumfa mai kyau
- Rarrabawa iri ɗaya ce sosai
- Babu toshewa
Bututun ƙarfe masu ramuka (20-100 µm) suna aiki mafi kyau.
11. Dalilin da yasa Abokan Ciniki ke Canjawa zuwa HENGKO
Ana amfani da matatun ƙarfe masu ramuka a cikin nazarin semiconductor, petrochemical, muhalli, da iskar gas,
da tsarin sarrafa kansa na masana'antu.
Kamfanoni da yawa na duniya suna amfani da abubuwan ƙarfe masu ramuka na mallaka, amma HENGKO yana ba da
cikakken jituwa da maye gurbin ma'aunitare da aiki daidai ko mafi kyau.
| Fasali | MOTT / Ames / Wasu | HENGKO |
|---|---|---|
| Keɓancewa na OEM | Iyakance | Unlimited (cikakken OEM/ODM) |
| Lokacin Isarwa | A hankali | Mai sauri, mai sassauƙa |
| Matsakaicin kudin shiga (MOQ) | Matsakaici-Mafi Girma | Ƙarancin MOQ yana samuwa |
| farashi | Mafi girma | Mafi inganci |
| Tallafin Injiniya | Mai ƙarfi | Ƙarfi + Da sauri + Mai sassauci |
| Na'urar auna firikwensin gidaje OEM | Ba kasafai ake samu ba | Na musamman |
Sabis na Musamman na OEM / ODM na 11.1
OEM/ODM shine ginshiƙin kasuwancin ƙarfe mai ramuka na HENGKO.
Muna goyon bayacikakken keɓancewa, ciki har da:
Sigogi na Keɓancewa
| Sigar Musamman | Bayani |
|---|---|
| Ƙimar Micron | 0.1–100 µm (daidaitaccen ikon sarrafa PSD) |
| Kayan Aiki | 316L / Tagulla / Titanium / Monel / Inconel |
| Girma | OD/ID/Tsawon/Kauri gaba ɗaya za a iya daidaita shi |
| Siffofi | Faifan diski, bututu, mazugi, kofi, harsashi, toshe |
| Tsarin Zaren Zare | NPT, BSP, UNF, M10/M12, ko kuma na musamman |
| Ƙarshen Fuskar | Electropolish, passivation, polishing |
| Walda | Walda ta Laser, walda ta TIG |
| Tsarin rami | Porosity mai sarrafawa (10–55%) |
| Aikin Gudawa | An tsara shi bisa ga manufofin rage matsin lamba |
| Tambari / Lakabi | Bugawa ta OEM, alamar Laser |
| Marufi | Masana'antar PE, mai hana ƙura, zaɓuɓɓukan ɗaki masu tsafta |
11.2 Tsarin Tsarin OEM
1. Tarin Bukatu
Matsayin Micron / kayan aiki / zane / muhalli / manufa kwarara
2. Zane & Kwaikwayo
Yawan kwarara, rarrabawar porosity, nazarin nauyin injina
3. Ƙirƙirar Samfura
Ƙananan samfura (guda 1-20)
4. Gwaji & Tabbatarwa
Gwaje-gwajen daidaiton matsi, sinadarai, da girma
5. Samar da Taro Mai Yawa
Injin tacewa na injin tsotsa + CNC + walda + QC
6. Marufi & Jigilar kaya
Marufi na fitarwa na masana'antu
Tambayoyin da ake yawan yi - Tambayoyin Injiniya na gama gari
1. Menene daidaitaccen ma'aunin ma'aunin micron na matatun ƙarfe masu ramuka?
Ana samun matatun ƙarfe masu porous na HENGKO daga0.1 µm zuwa 100 µm, tare da kunkuntar PSD don ingantaccen aikin tacewa mai maimaitawa.
2. Za a iya tsaftace matatun ƙarfe masu ramuka a kuma sake amfani da su?
Eh. Ana iya tsaftace su ta hanyar:
*Baya-baya
* Tsaftace Ultrasonic
*Tsabtace sinadarai (acid/alkali ya danganta da kayan da aka yi amfani da su)
* Yin burodi mai zafi sosai
Wannan yana sa su zama masu inganci sosai idan aka kwatanta da matatun da za a iya zubarwa.
3. Menene matsakaicin juriyar zafin jiki?
| Kayan Aiki | Matsakaicin Zafin Jiki |
|---|---|
| 316L | 400–500°C |
| Titanium | Har zuwa 600°C |
| Alloy na Nickel | Har zuwa 600°C |
| Tagulla | ~250°C |
4. Wane matsin lamba matatun ƙarfe masu ramuka za su iya jure wa?
Dangane da OD/ID da kauri, za su iya jurewa har zuwa:
*10–30 MPa(Bututun lita 316)
*5–20 MPa(faifai da mazugi)
Samfura na musamman masu matsin lamba suna samuwa akan buƙata.
5. Shin matatun ƙarfe masu ramuka sun dace da iskar gas ko ruwa mai lalata?
Eh.
316L ya dace da sinadarai na masana'antu gabaɗaya.
Ana ba da shawarar yin amfani da ƙarfe na titanium da nickel don:
* Iskar gas mai guba
* Iskar gas mai guba
* Ruwa mai lalata
* Sinadaran da ke da tsafta sosai
6. Za ku iya ƙera bisa ga zane ko samfura?
Hakika.
Mun yarda:
*Fayil ɗin CAD na 2D/3D
*MATAKAI/IGES
* Samfuran jiki
* Bukatun injiniyan baya
7. Menene lokacin jagoranci na yau da kullun?
* Samfura:Kwanaki 7–12
* Samar da kayayyaki masu yawa:Kwanaki 15–25
* Manyan umarni na OEM: an yi shawarwari bisa ga girma
8. Shin kuna samar da alamar OEM da lakabi?
Eh, muna goyon bayan:
* Tambayoyi masu siffar laser
*Marufi mai zaman kansa na lakabi
* Buga lambar barcode ta OEM
9. Waɗanne masana'antu ne ke amfani da matatun ƙarfe masu ramuka?
* Mai haɗa semiconductor
*Binciken iskar gas
*Tsire-tsire masu sinadarai
*Sa ido kan muhalli
* Tsarin mai da hydrogen
*Tsarin injinan iska
*Dakin gwaje-gwaje da fasahar kere-kere
10. Ta yaya zan iya samun ƙimar fasaha?
Za ka iya aika bayanan aikinka ta imel kai tsaye zuwa:ka@hengko.com
Shin Ka Shirya Don Fara Aikin Tace Karfe Mai Rarrafe?
Muna ba da cikakken tallafin injiniyan OEM/ODM, tun daga ƙirar ƙimar micron har zuwa kammala haɗakar ƙarfe mai sintered.
Ko kuna buƙatar matatun mai mai girman 316L, Titanium, ko nickel alloy, ƙungiyarmu ta fasaha za ta iya taimaka muku wajen gina mafita mai dacewa.
Bukatunku ta imel zuwa gare mu: ka@hengko.com
- Tallafin WhatsApp/WeChat yana samuwa idan an buƙata
- Zane • Bayani • Samfura • Zane-zane na Musamman
HENGKO - Masana'antar OEM ɗin matatar ƙarfe mai ramuka da aminci
